Revision history [back]
Feasibility of micro hydro turbines
We have a system where following are the parameters.
1)Diameter of the pipe-60 Centimeter 2)Flow in the pipe-1500 litres/minute(continuous flow throughout the year) 3)Head-3 to 4 Meters 4)Pressure-1.5kg
Kindly suggest feasibility of Micro hydro turbines. Our requirement is to supply to the lighting loads with in 1kW.
Would like to receive an budgetary offer for the installation if possible.
Feasibility of micro hydro turbines
A question from Binoy-I am from India and wanted to know about the feasibility of installation of micro hydro turbines (with-in 1kW) inside an industrial area. We have a system where the following are the parameters.
1)Diameter of the pipe-60 Centimeter 2)Flow in the pipe-1500 litres/minute(continuous flow throughout the year) 3)Head-3 to 4 Meters 4)Pressure-1.5kg
Kindly suggest
the
feasibility of
Micro hydro
Micro-hydro
turbines. Our requirement is to supply to the lighting loads
with in
within
1kW.
Would like to receive
an
a
budgetary offer for the installation if possible.
Feasibility
Installation
of micro hydro turbines
A question from Binoy-I
Is it feasible to install micro-hydro turbines (with-in 1kW) inside an industrial area? The
current system installed has the parameters of: Diameter of the pipe-60 Centimeter, Flow in the
pipe-1500 litres/minute (continuous flow throughout the year, Head-3 to 4 Meters,
Pressure-1.5kg.
I am seeking advice on behalf of the enquirer below: Original enquiry: “I am from India and wanted to know about the feasibility of installation of micro hydro turbines (with-in 1kW) inside an industrial area. We have a system where the following are the parameters.
1)Diameter of the pipe-60
Centimeter
Centimeter
2)Flow in the pipe-1500 litres/minute(continuous flow throughout the
year)
year)
3)Head-3 to 4
Meters
Meters
4)Pressure-1.5kg
Kindly suggest the feasibility of Micro-hydro turbines. Our requirement is to supply to the
lighting loads within
1kW.
Would
1kW.Would
like to receive a budgetary offer for the installation if
possible.
possible.”
4 |
retagged
|
|
Installation of micro hydro turbines
Is it feasible to install micro-hydro turbines (with-in 1kW) inside an industrial area? The current system installed has the parameters of: Diameter of the pipe-60 Centimeter, Flow in the pipe-1500 litres/minute (continuous flow throughout the year, Head-3 to 4 Meters, Pressure-1.5kg.
I am seeking advice on behalf of the enquirer below: Original enquiry: “I am from India and wanted to know about the feasibility of installation of micro hydro turbines (with-in 1kW) inside an industrial area. We have a system where the following are the parameters.
1)Diameter of the pipe-60 Centimeter 2)Flow in the pipe-1500 litres/minute(continuous flow throughout the year) 3)Head-3 to 4 Meters 4)Pressure-1.5kg
Kindly suggest the feasibility of Micro-hydro turbines. Our requirement is to supply to the lighting loads within 1kW.Would like to receive a budgetary offer for the installation if possible.”